JSON-LD markup generated by Google Structured Data Markup Helper.

Call (209) 521-2378

Go to…

Chevrolet

Home / Chevrolet

We Service and Repair all Chevrolet cars

  • 2011 Chevrolet Tahoe

    Chevrolet Tahoe
    Mileage
    203,303
    Service Date
    3/25/2024
    Services Performed
    • changed oil, replace engine filter, lubed chassis (if applicable), inspected and adjusted tire pressure as state required, topped off fluids
     
    SEBASTIAN R. gave our service a 5 star review on 3/25/2024

  • 2014 Chevrolet Equinox

    Chevrolet Equinox
    Mileage
    128,064
    Service Date
    11/30/2023
    Services Performed
    • Confirmed the customer complaint, found rattling noise is heard when accelerating the engine. Checked oil level and found oil is not registering on the dip stick at this time. FOUND NOISE IS COMING FROM THE TIMING CHAIN AND VALVETRAIN ON TOP OF ENGINE DUE TO LACK OF LUBRICATION. Recommend oil change service is performed, and 1 qt of oil is substituted w/ 1 qt of the Lucas Oil Stabilizer to sooth engine. INSPECTED THE VEHICLE FOR LEAKS AND FOUND THE FRONT CRANKSHAFT SEAL IS LEAKING OIL. POSSIBLE TIMING COVER LEAK, RECOMMEND THE FRONT CRANKSHAFT SEAL IS REMOVED AND REPLACED FIRST THEN WILL RE-CHECK FOR LEAKS. Front brake pad percentage is at 20% remaining life, recommend the front brake pads are replaced and both front rotors are resurfaced if within specification. Rear brake pad percentage is at 15% remaining life. Recommend the rear brake pads are replaced and both rear rotors are scuffed if within specification. Scanned the engine control module for codes: P0300 – Random Cylinder Misfire Detected.
    • changed oil, replaced engine oil filter, lubed chassi (if applicable), inspected and adjusted tire pressure as state required, topped off fluids. set tire pressure to factory spec
     
    Ester W. gave our service a 5 star review on 12/8/2023

  • 2007 Chevrolet HHR

    Chevrolet HHR
    Mileage
    162,289
    Service Date
    11/6/2023
    Services Performed
    • Confirmed the vehicle is not starting at this time. Performed shock test on the starter while turning the ignition switch to the run position and the engine started, this confirms the starter is internally faulty, recommend the starter is removed and replaced. Customer approved starter replacement.
    • Removed and replaced the starter assembly. The vehicle is now starting fine at this time.
     
    Ceci M. gave our service a 5 star review on 11/30/2023