check vehicle and found that the engine is lock is not turning by hand and have rod broken recommend to replace the engine with used or long block customer OK with a used engine ALSO THE TURBO NEED TO BE REPLACE RECOMMEND NOT TO FORCE ENGINE DUE TO TURBO MALFUNCTION CUSTOMER DECLINES REPAIRS AT THIS TIME
remove and replace the used and engine with all this parts spark plugs, thermostat , thermostat housing , water pump , oil and filter coolant , catalytic converter ,gaskets and alternator .
JEREMY H. gave our service a 5 star review on 6/27/2024
Confirmed the check engine light is illuminated on the instrument panel cluster. Scanned the engine control module for codes: P0456 – Evaporative System Leak Detected (Very Small Leak Detected) P1450 – Unable Too Bleed Fuel Tank Vacuum. Removed the purge valve for inspection and found the purge valve is not sealing when commanded closed, recommend the purge valve is removed and replaced. CUSTOMER APPROVED FUEL TANK VENT VALVE REPLACEMENT SPOKE W/ STEVEN.
Removed and replaced the canister purge solenoid. Reset the check engine light and road tested the vehicle for final inspection, the check engine light has not returned at this time.
Steven C. gave our service a 5 star review on 2/28/2024
changed oil, replace engine filter, lubed chassis (if applicable), inspected and adjusted tire pressure as state required, topped off fluids
Reset the maintenance minder light and set the maintenance minder sticker on the windshield. Topped off all fluids and set tire pressure to factory specification. Front brake pad percentage is at 40% remaining life, rear brake pad percentage is at 60% remaining life.
LOREN C. gave our service a 5 star review on 2/23/2024
changed oil, replace engine filter, lubed chassis (if applicable), inspected and adjusted tire pressure as state required, topped off fluids
Reset the maintenance minder light and set the maintenance minder sticker on the windshield. Topped off all fluids and set tire pressure to factory specification. Front brake pad percentage is at 80% remaining life, rear brake pad percentage is at 80% remaining life.
Jesus G. gave our service a 5 star review on 2/2/2024
Confirmed rattle noise during high acceleration. Scanned the engine control module for codes: P0344 – Camshaft Position Sensor A, P0365 – Camshaft Position Sensor B, P0369 – Camshaft Position Sensor B. Inspected the vehicle for oil leaks and found an oil puddle underneath the engine oil filter. Checked oil level and found oil does not register on the oil level dip stick at this time. FOUND OIL FILTER IS LOOSE WHICH CAUSED THE OIL TO LEAK OUT OF MOTOR. Recommend the oil change service is performed. POSSIBLE INTERNAL ENGINE DAMAGE FROM DRIVING THE VEHICLE W/ LOW OIL LEVEL. Customer approve oil change service.
changed oil, replace engine filter, lubed chassis (if applicable), inspected and adjusted tire pressure as state required, topped off fluids Reset the check engine light and road tested the vehicle after oil change. RATTLE NOISE IS NO LONGER HEARD AND THE CHECK ENGINE LIGHT HAS NOT RETURNED AT THIS TIME. IF ENGINE NOISE RETURNS RECOMMEND ENGINE TEAR DOWN OR ENGINE REPLACEMENT. RECOMMEND CUSTOMER CHECKED OIL LEVEL REGULARLY TO PREVENT CATASTROPHIC ENGINE FAILURE.
Milton R. gave our service a 5 star review on 1/5/2024